I've used a very small and sharp drill bit

I've used a very small and sharp drill bit
Re: HELP, knot stuck in a bead -- si	Post Reply	Edit		Forum	Where am I?

Posted by: Rosanna

Post Reply
01/16/2020, 23:24:11

However I don't know if you can find one long enough if the knot is inside a very long bead. I use carbide bits designed for wood or metal working.

I gently twist the drill bit (using a pin vise to hold it) to cut through the knot.

Re: I've used a very small and sharp drill bit --- si ( 2020-01-17 02:29 )
- Re: Re: I've used a very small and sharp drill bit- I WOULDNT! --- stefany ( 2020-01-17 03:51 )
- I use a pin vise - do not use a regular drill! --- Rosanna ( 2020-01-17 07:19 )
- Use a dental pick --- Divedog ( 2020-01-17 07:33 )
  - What about a corrosive --- Si ( 2020-01-17 12:45 )
    - Re: What about a corrosive --- Divedog ( 2020-01-17 14:19 )
    - Re:: corrosive --- Stefany ( 2020-01-17 16:55 )
      - Acetone --- Beadman ( 2020-01-17 17:17 )